Original
By certification 
Introduction
Flat bottom limestone steel storage spiral silo material is double size galvanized steel.
Our invert cone steel silos are Installed on-site by the company's own fitters and with its own sizes.
Flat bottom limestone steel storage spiral silo
To storage limestone need to avoid wet air.
Spiral steel silo is the best steel structure for limestone storage. Spiral silo is import LIPP technical from Germany.
The edge of spiral silo is five times thickness than that of silo shell. No leakage of air, even powder.
Steel structure silo is easy to install, short installation period, and save labors, long life time—more than 30 years.
The capacity can be from 50 ton to 10,000 ton per silo. All of our LIPP silo are in round shape, the diameter will be from 3 meter to 30 meter per silo.
Silo bottom can be dived into different types. Conical hopper bottom and flat hopper bottom.
The conical hopper bottom silo capacity always be small silo, the capacity of silo is not more than 2000 ton. But the silo will be built with some accessory equipment, such as vibrator on silo hopper, aeration box on silo hopper, to ensure the limestone discharge smoothly.
The flat bottom silo always be invert cone inside silo bottom, the function is to reduce the pressure when discharge limestone from the center of silo top. For this type, the invert cone can avoid the limestone flow down to the aeration box directly. The aeration box is to make the limestone discharge smoothly.
Some big silos will have more than one invert cone inside silo bottom..
Silos’ on ground foundation can be steel structure and concrete structure.
Steel structure foundation silo always be small silo, the capacity is lower than 1500 ton.
Concrete structure foundation silo can be each type structure silo.
Featrue
1. Find the center and circumference of a circle line
2. Set up the forming machine and bending machine
3. Set up the frame and the supporting frame in horizontal
4. Put the coil into the forming machine
5. With the bending machine bending bite into the spiral rib 5 times the thickness of the silo body.
6. When the silo height volume to 2m, use automatic cutting machine cut silo body top in horizontal.
7. Production and installation of silo roof.
8. Use bending and forming machine make silo to the silo height
9. According to the requirements of the drawings of reinforcing ribs, weld it in the inner wall of silo. (This step is constructing at the same time of step 8)
10. Use the cutting machine cut the silo body bottom plate in horizontal.
11. Reverse rotation silo to silo foundation plate, fall to the embedded steel part.
12. Connect the reinforcing rib and the embedded part, rooting.
Company Name: Jiangsu Liangyou International Mechanical Engineering Co., Ltd.
Operational Address: No. 19, Suyuan Avenue, Economic
Flat bottom limestone steel storage spiral silo material is double size galvanized steel.
Our invert cone steel silos are Installed on-site by the company's own fitters and with its own sizes.
Flat bottom limestone steel storage spiral silo
To storage limestone need to avoid wet air.
Spiral steel silo is the best steel structure for limestone storage. Spiral silo is import LIPP technical from Germany.
The edge of spiral silo is five times thickness than that of silo shell. No leakage of air, even powder.
Steel structure silo is easy to install, short installation period, and save labors, long life time—more than 30 years.
The capacity can be from 50 ton to 10,000 ton per silo. All of our LIPP silo are in round shape, the diameter will be from 3 meter to 30 meter per silo.
Silo bottom can be dived into different types. Conical hopper bottom and flat hopper bottom.
The conical hopper bottom silo capacity always be small silo, the capacity of silo is not more than 2000 ton. But the silo will be built with some accessory equipment, such as vibrator on silo hopper, aeration box on silo hopper, to ensure the limestone discharge smoothly.
The flat bottom silo always be invert cone inside silo bottom, the function is to reduce the pressure when discharge limestone from the center of silo top. For this type, the invert cone can avoid the limestone flow down to the aeration box directly. The aeration box is to make the limestone discharge smoothly.
Some big silos will have more than one invert cone inside silo bottom..
Silos’ on ground foundation can be steel structure and concrete structure.
Steel structure foundation silo always be small silo, the capacity is lower than 1500 ton.
Concrete structure foundation silo can be each type structure silo.
Featrue
1. Find the center and circumference of a circle line
2. Set up the forming machine and bending machine
3. Set up the frame and the supporting frame in horizontal
4. Put the coil into the forming machine
5. With the bending machine bending bite into the spiral rib 5 times the thickness of the silo body.
6. When the silo height volume to 2m, use automatic cutting machine cut silo body top in horizontal.
7. Production and installation of silo roof.
8. Use bending and forming machine make silo to the silo height
9. According to the requirements of the drawings of reinforcing ribs, weld it in the inner wall of silo. (This step is constructing at the same time of step 8)
10. Use the cutting machine cut the silo body bottom plate in horizontal.
11. Reverse rotation silo to silo foundation plate, fall to the embedded steel part.
12. Connect the reinforcing rib and the embedded part, rooting.
Company Name: Jiangsu Liangyou International Mechanical Engineering Co., Ltd.
Operational Address: No. 19, Suyuan Avenue, Economic
