Product Information
The DEED RY-GB8550BF5 5-axis portal bridge machining center adopts simple drive chain, and the X axis, Y axis and Z axis motion adopt servo motor direct drive mechanism. The high-precision ball screw pair is used for the transmission of all directional feeding movement, with good transmission rigidity, high precision and long service life. The spindle is a high-precision mechanical spindle made in Taiwan, driven by synchronous belt, with high precision, large torque and stable operation. Its guide rail adopts high-precision linear guide rail, and simple and reliable transmission ensures stable and reliable working accuracy of gantry machining center.
The DEED RY-GB8550BF5 5-axis portal bridge machining center has good rigidity, strong vibration resistance and high dynamic accuracy. Its main components, such as bed, workbench, column, beam, boring and milling head box, are made of cast iron. The overall quality is sufficient, which greatly improves the rigidity and anti vibration performance of the machining center and ensures that the gantry machining center has a high dynamic accuracy.
Specification
Table : | |
Table size(W×L) | 3500mm´9000mm |
Width between column(not contain protection cover) | 5000mm |
T slot width | 36mm |
T slot pitch | 250 mm |
Table load capacity | 5000kg/m² |
Movable beam(X axis): | |
travel | 8500 mm |
Cutting Feed rat | 10~20000mm/min |
Rapid feed rat | 28000mm/min |
Positioning accuracy | 0.01mm |
Repeat ability | 0.005mm |
The horizontal cross slide(Y axis): | |
travel | 4000mm |
Cutting Feed rat | 10~20000mm/min |
Rapid feed rat | 28000mm/min |
Positioning accuracy | 0.01mm |
Repeat ability | 0.005mm |
Spindle(Z axis): | |
travel | 1500mm |
Cutting Feed rat | 10~15000mm/min |
Rapid feed rat | 20000mm/min |
Spindle section cross size | 600mm×600mm |
Positioning accuracy | 0.01mm |
Repeat ability | 0.005mm |
C axis speed | 12rpm |
C axis rotation angle | ±185° |
Positioning accuracy | 8″ |
Repeat ability | 3″ |
Milling head: | |
B axis swing head | |
Spindle motor power | 56Kw |
Spindle Max speed | 12000rpm |
Spindle Max torque | 89Nm |
B axis speed | 6rpm |
B axis rotation angel | -110°/+5° |
Spindle taper | HSKA63 |
Vertical milling head | |
Motor power | 60KW |
Max speed | 6000rpm |
Max torque | 1830Nm |
Right angle milling head | |
power | 60KW |
Max speed | 4000rpm |
Max torque | 1830Nm |
ATC: | |
Tool capacity | 60 pieces |
Tool type | HSK-A100 20pieces、 HSK-A63 40 pieces |
http://www.cncindeed.com/