Product Information
The structure of the tool of CNC vertical machining machine V1160L has been greatly improved. The vibration frequency of the machine tool is far higher than the inherent process system. Therefore, the workpiece is basically in a "vibration free" stable state during high-speed cutting, and the influence of cutting force and cutting heat is small, so it is easier to obtain parts with higher machining accuracy. In addition, due to the effective control of chip nodule, surface residual stress and other defects in the higher cutting speed range, the machine can obtain the quality of the machined surface during high-speed cutting, effectively reducing the subsequent processing procedures.
Features
Because high-speed cutting has small cutting force, small cutting deformation and tool is not easy to wear, the CNC vertical machining machine V1160L can be used to process some materials that are difficult to machine, such as aluminum alloy, magnesium alloy, nickel alloy and titanium alloy, which are widely used in aerospace industry. Generally speaking, these materials have the characteristics of high strength, high hardness, high abrasion resistance and impact resistance. High speed cutting can effectively reduce tool wear, prolong tool life, improve production efficiency, and obtain higher surface quality.
Specification
TRAVEL | |
X-axis travel | 1100mm |
Y-axis travel | 610mm |
Z-axis travel | 610mm |
Spindle nose to table surface | 150~760 mm |
SPINDLE | |
Drive type | Belt drive/Direct drive |
Spindle taper | BT40 |
Max. Speed | 8000 rpm / 10000 rpm |
Spindle Power | 11/18.5 kW |
Spindle Torque | 52.5/118 Nm |
TABLE | |
Size | 1200x600mm |
T-Slot (size * quantity * space) | 18x5x100mm |
Max load | 1000kgs |
FEED | |
Max.cutting speed | 1-12000 mm/min |
Rapid traverse | 36/36/24 m/min |
ACCURACY | |
Positioning(half-closed loop) | 0.008mm |
Repeatability(half-closed loop) | 0.005mm |
ATC | |
Type | Disc type ATC 24T |
Maximum tool size(full/unfull/length) | Φ78/Φ150/ 300 mm |
Maximum tool weight | 8kg |
OTHERS | |
Air Pressure | 0.65Mpa |
Power Capacity | 25kVA |
Machine Weight | 7000kgs |
Machine Floor Space (L *W *H) | 2900x2800x3200mm |
Standard
Whole machine cover
Belt type spindle BT40-8000rpm
Spindle taper air blow
Spindle air curtain dust-free
Spindle ring spray
Flexible cover
Tri-color alarm light
Auto lubrication system
Air gun
Disk type ATC BT40-24T
Heat exchange for electrical cabinet
Manual pulse generator
Working lamp
4-axis preparation
Communication interface
Workpiece water cooling
Workpiece air cooling
Option
CTS 20bar/30bar
Chain type conveyor and cart
Electric cabinet air conditioner
Flush device
Spindle temperature control system
Water gun
Siemens/Mitsubishi controller
Etc.
http://www.cncindeed.com/